A hot and sunny bank holiday Sunday gave an ideal chance to get outside and do some cutting and soldering in the yard, avoiding fumes and glass splinters in the house. I wanted to make another bottle centre suncatcher, this time as a gift for an upcoming celebration.
First thing to do was to look in the box of glass sheets and see what might work together. I had bought a number of random pack sheets, and had a yellow and white opalescent Spectrum sheet that I hadn’t seen a use for previously. I wanted to make an offset coloured border around the suncatcher like the last one I made, which turned out strong and attractive, so settled on that colour. A brown beer bottle centre was ideal for the job, this time made from a discarded bottle of Budweiser collected from a street on the walk home from work. With a near solid yellow border, and a brown bottle centre, I wanted a semi opaque glass that would compliment and blend both together. I had a part-used light amber Cathedral sheet from a recent prairie style hanger which was perfect for the job.
Cutting the glass went very easily this time round. Using the cross template, the amber Cathedral cut beautifully, with no problems around the circle outline of the bottle bottom. As further practise for cutting accuracy, I again cut the yellow border just on a measurement basis, with no template, which was close enough for soldering, but did require the use of pins to manipulate slightly to make all the joints meet up smoothly and look square when tinned.
Soldering was completed neatly using K grade solder. To finish off, a corner hanger with longer legs to cross over two pieces of the border for strength was added to the top corner, and I went with a copper patina finish to nicely compliment the yellow and brown colours. The amber and yellow tones all blend together nicely, and has some favourable reactions already.