Baileys bottle vase

Another bank holiday weekend comes around, and last night I was given an empty large Baileys Irish cream bottle by a relative, so just bashed right on with it today. Baileys

The bottles are very dark olive green in colour, and hardly passes any light through the glass, even in direct sunlight. This makes it limited for use with candles, for example using it as a hanger or a hurricane. The bottom of the bottle has a rotation stopping dimple in it above the level of the Baileys embossed text at the bottom of the bottle, so that leaves it hard to chop for a centre without having to go very deep in to the bottle. Best use for it is the simplest one – a straight forward chop at the top to make a heavyweight vase or pot.

These thick bottles can be Baileysvasepretty easy to do once you’ve had a few goes. The weight of the glass needs a big thermal shock to break through cleanly to leave a flattish surface, so you don’t have to spend an excessive amount of time finish it. This requires a big heat to split, so needs to have a very clean cut to avoid breaking poorly. The G2 cutter is ideal for the job. I cut a clean, light score with the G2, and gave it a long heat (about 10 rotations) in hot water just off the boil, then a quick full rotation under a running cold tap to shock it. A second hot water pour split the bottle very cleanly indeed, leaving a flat surface that only needed about 20 minutes work with 3 grades of diamond pad (125/400/800 grit) to leave a very smooth, symmetrical and neat finish indeed. A simple bottle cut to make a useful, solid pot for no real cost other than a half hour of time.

Leave a Reply

Your email address will not be published. Required fields are marked *