I bought a small square of bullseye reeded glass about a year ago, intending to use it in a prairie style copperfoil design at sometime, but when I came to make one recently, it didn’t really work in with the other colours I picked, so I set it aside for another use. I also had a grey cathedral glass, again for another idea initially, but the two together looked good, giving a sort of black and white look, so that’s the way I decided to go.
A clear mini wine bottle bottom, rescued from a street nearby a month or two back, was picked out of the pile, and cut and prepared for foiling. Clear was the only choice to avoid any colour in the design. I centred the bottle end on the cross template, and cut a 100x100mm square of grey cathedral glass, cutting it into four, then shaping the arc around the outline of the bottle end. I then cut the reeded glass into 20x120mm strips to be able to form a border around the grey square, offsetting the corners for strength. I ground the edges a little in parts to level off to ensure a tight and neat fit when foiled, and used silver backed copper foil tape to allow a silver finish in the end to compliment the monochrome look. Soldering was completed using K grade solder, and cleaned up to give a shiny finish.
When hung in the light, the two directions of the reeded glass catches the light differently, giving an effect of four different tones across the whole design, which works very well in a monochrome way. I’m really pleased with the end result.